SCK-100 Spin Coater Kit
This is a fully assembled, modular kit, that comes with
everything needed for R&D spin-coating work.  Selling for
under $400 US (Purchase from Ebay Store),  it's a lot more
cost effective than building one from scratch.  If you are
interested in this kit, please fill out the online contact form.  You
can also take a look at the User Manual for more information.

Key features of the SCK-100 are:
  • Low Cost  - The cost of this kit is significantly less than
    a commercial spin-coater unit. This makes it ideal for
    R&D work where the benefits of a commercial spin-
    coater is yet to be determined.  It also means that
    multiple units can be purchased to speed up the
    research process.
  • Compact Size - The small foot print of the SCK-100
    means that it requires very little space to be set up.  For
    example, the unit can be set up in a crowded hood, or
    inside a glove box.
  • Easy to Use - Simply turn on the unit, place sample in
    the chamber, and set spin speed and start the coating
    process.
  • Simple/Modular Design - To function, the unit only
    needs a A/C power source and no vacuum pump.  Also,
    as a result of the modular design, replacement parts can
    be purchased separately.  For example, if the spin
    chamber becomes too dirty or damaged, then it can be
    replaced at very little cost.
  • Dynamic Spin Range - Spin rates from 500 - 6,000
    RPM on base model, or 2,000 - 12,000 RPM on high
    speed model, can be achieved with reasonable good
    control. This range works well for most spin-coating work.